bookworm% ./smartctl -a /dev/disk4 smartctl 6.1 2013-03-16 r3800 [x86_64-apple-darwin12.3.0] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org SATSMARTLibFactory called SATSMARTClient::alloc called SATSMARTClient : QueryInterface called kIOCFPlugInInterfaceID requested SATSMARTClient::Probe called SATSMARTClient::Probe called 0 SATSMARTClient : Start SATSMARTClient : IOServiceOpen status = 0x00000000, connection = 5907 SATSMARTClient : QueryInterface called kIOATASMARTInterfaceID requested SATSMARTClient::GetATAIdentifyData 0x200 SATSMARTClient::GetATAIdentifyData status = 0 === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device Model: ST3750330AS Serial Number: 5QK0C5LT LU WWN Device Id: 5 000c50 00cf7601f Firmware Version: SD1A User Capacity: 750,156,374,016 bytes [750 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Aug 11 13:37:18 2013 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled SATSMARTClient::SMARTReadData called SATSMARTClient::SMARTReadData status = 0 SATSMARTClient::SMARTReadDataThresholds called SATSMARTClient::SMARTReadDataThresholds status = 0 === START OF READ SMART DATA SECTION === SATSMARTClient::SMARTReturnStatus called exceededCondition = 0 SATSMARTClient::SMARTReturnStatus status = 0 outputCnt = 1 SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 650) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 170) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 108 099 006 Pre-fail Always - 20313169 3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4337 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always - 2246734 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1226 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 25 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 7 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 066 064 045 Old_age Always - 34 (Min/Max 24/36) 194 Temperature_Celsius 0x0022 034 040 000 Old_age Always - 34 (0 23 0 0 0) 195 Hardware_ECC_Recovered 0x001a 047 022 000 Old_age Always - 20313169 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SATSMARTClient::SMARTReadLogAtAddress called SATSMARTClient::SMARTReadLogAtAddress address = 0 SATSMARTClient::SMARTReadLogAtAddress status = 0x0 SATSMARTClient::SMARTReadLogAtAddress called SATSMARTClient::SMARTReadLogAtAddress address = 1 SATSMARTClient::SMARTReadLogAtAddress status = 0x0 SMART Error Log Version: 1 No Errors Logged SATSMARTClient::SMARTReadLogAtAddress called SATSMARTClient::SMARTReadLogAtAddress address = 6 SATSMARTClient::SMARTReadLogAtAddress status = 0x0 SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SATSMARTClient::SMARTReadLogAtAddress called SATSMARTClient::SMARTReadLogAtAddress address = 9 SATSMARTClient::SMARTReadLogAtAddress status = 0x0 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SATSMARTClient : Stop SATSMARTClient : IOServiceClose connection = 5907